Brass Taps
We have been involved in the manufacture of these taps for over 60 years. All taps are machined, assembled & tested on the premises. Each tap is tested to 4.5 bar before being despatched.
DB1 – BENT
NOSE DRAIN COCK (WINE COCKS)
TYPE | BSPT | ||
---|---|---|---|
(1/8 BSPT) | DB1 | x | 1/8 BSPT |
TYPE | BSPT | ||
---|---|---|---|
(1/4 BSPT) | DB1 | x | 1/4 BSPT |
TYPE | BSPT | ||
---|---|---|---|
(5/16 SPECIAL) | DB1 | x | 5/16 SPECIAL |
TYPE | BSPT | ||
---|---|---|---|
(3/8 BSPT) | DB1 | x | 3/8 BSPT |
TYPE | BSPT | ||
---|---|---|---|
(1/4 BSPT CP) | DB1 | x | 1/4 BSPT CP |
TYPE | BSPT | ||
---|---|---|---|
(3/8 BSPT CP) | DB1 | x | 3/8 BSPT CP |
DOUBLE ENDED
SOLDER-ON LEVER TAPS
TYPE | TUBE | |||
---|---|---|---|---|
(1/4 copper tube) | T8 | x | 1/4 copper tube |
TYPE | TUBE | |||
---|---|---|---|---|
(5/16 copper tube) | T9 | x | 5/16 copper tube |
TYPE | TUBE | |||
---|---|---|---|---|
(3/8 copper tube) | T10 | x | 3/8 copper tube |
PLASTIC TUBE
LEVER TAPS
TYPE | TUBE | BSPT | |||
---|---|---|---|---|---|
(3/16 5mm) | JT3 | x | 3/16 5mm | x | 1/8 BSPT |
TYPE | TUBE | BSPT | |||
---|---|---|---|---|---|
(1/4 6mm) | JT3 | x | 1/4 6mm | x | 1/8 BSPT |
TYPE | TUBE | BSPT | |||
---|---|---|---|---|---|
(5/16 8mm) | JT3 | x | 5/16 8mm | x | 1/8 BSPT |
TYPE | TUBE | BSPT | |||
---|---|---|---|---|---|
( 3/8 10mm) | JT3 | x | 3/8 10mm | x | 1/8 BSPT |
Beer Fittings
Below is a small sample of the fittings we produce for the dispensing of draft beer. All fittings are compatible with similar fittings in use today. We have been involved in the manufacture of beer fittings for over 50 years & have supplied the major breweries in that time. 304 stainless is used for all fittings in contact with beer. A system in common use today, designed &produced by us, is the stainless steel Pin Valve, Inline Valve system.